Pocket UT logo
Pocket UT® Features & Specs

Pocket UT® Features & Specs

The Pocket UT® Hand Held Ultrasonic Full C-Scan Data Acquisition System offers an unprecedented amount of functionality in a small package. Read on for a detailed breakdown of the Pocket UT's capabilities and specifications.

Pocket UT outline image Click To Enlarge

Key Features:

  • Data logging
  • Complete C-Scan with waveform storage
  • Thickness testing digital display w/A-Scan
  • Flaw detector w/A and B-Scan
  • Real time FFT spectrum analysis
  • Spike, Square Wave and Tone Burst
  • Field auditing tool (meets any UT testing need)
  • 2-axis manual/automated scanner
  • interface for immersion testing or contact testing
  • Easy hand-held operation
  • Windows CE software, familiar and easy to operate
  • Up to 4-hour, integrated battery pack
  • Shortcut keypad and LCD for data entry, analysis and review of results, touch screen pendant control
  • Optional rolling sensor provides continuous area scan rather than point readings as with other NDT devices
  • C-Scan resolution up to full capability of the scanner
  • Dual gates with IP or first ECHO synchronization for contact or immersion testing
  • Permanent digital record of the test results
  • Compact Flash card and USB port for data transfer to laptop or desktop PC
  • Pocket UT® Specifications:

    Functions: Thickness gauge, flaw detector, A-, B- or full C-Scan
    Pulse Voltage: 50 - 400 V Tunable Spike, Square, Tone Burst
    Pulse Width: 50 - 1000 ns
    Pulser Repetition Rate: 50 Hz - 1 kHz
    Bandwidth: 500 kHz - 20 MHz
    Receiver Gain Range: 0-92 dB
    A/D Resolution: 10 bits
    Maximum A/D Rate: 100M Samples per second - 100MSPS
    UT Operation Mode: Pulse-echo and dual/through transmission
    Dist. Amplitude Correction: Up to 60 dB in 0.1 dB steps
    Gates: 2 independent gates with separated gate delay, width controls, synchronization threshold and detection threshold
    Selectable Filters: 6 high pass and 5 low pass (127 Tap FIR)
    Selectable Trigger: Software controlled, external input, signal threshold
    Screen Operation: Freeze, waveform recall, zoom, pan and reference memory
    Report Generation: Can be used directly or further processed with PC-based UTWin™ Replay software
    USB Port: USB connectivity port
    Monitor: Standard 3.5" 1/4 VGA TFT display with 240 W x 320 H pixel resolution, touch screen
    Power: Powered by 7.2 V integrated battery
    Battery Time: Up to 4 hours, rechargeable, nickel
    Operating Temperature: -5° C to 45° C
    Operating Humidity: Up to 95%, non-condensing
    Dimensions: 9.5 x 5 x 2.2 in. (240 x 130 x 60 mm)
    Weight: 2 lbs. (.9 kg)